Miscellaneous Spare Parts
|
- Unless noted, all pricing shown below is the Recommended Retail Price (RRP) for the Chrome Plate metal finish (this is the finish code: CP).
- Please use the Finish Code drop-down menu on the individual product pages to view pricing for other metal finishes, such as brass, gold, copper and other colours.
- The Finish Code drop-down menu on the product page provides you with the list of metal finishes that a particular product is available in.
- The Finishes Guide tab on the product page is helpful for selecting the right metal finish.
|
-
- An error occurred, please try again later.
Loading, please wait...
-
SKU: PA8043
|
|
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
|
Compression nut for 3/4
" BSP with olive for 19.05mm (3/4
") O.D. tube.
Learn More
Ex GST:
AUD $43.33
Inc GST:
AUD $47.66
-
SKU: PA8034
Nylon olive for compression nuts on 19.05mm (3/4
") O.D. tube.
Learn More
Ex GST:
AUD $2.10
Inc GST:
AUD $2.31
-
SKU: SA7406
|
|
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
|
Handy item for covering an unused basin hole with o-ring seal and locking nut.
Outside Diameter: 38.1mm
Cover Thickness: 3.5mm
Tail Thread: 1/2
" BSP male thread, 60mm long (suitable for up to 45mm thick basin or bench).
Minimum hole size diameter: 20.7mm
This item is made to order.
Learn More
Ex GST:
AUD $150.00
Inc GST:
AUD $165.00
-
SKU: SA8420
|
|
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
|
Spare component for our laboratory range, adapter fits our flared aerator thread to allow for a 1/2
" BSP connection.
Not suitable for use with other companies' tapware.
Learn More
Ex GST:
AUD $53.91
Inc GST:
AUD $59.30
-
SKU: PA4339RB
Maximum Bench Thickness: 52mm
Spacing (Centre to Centre): 330mm
Adjustable Spacing: Yes, can be cut down on installation.
The minimum recommended Centre to Centre measurement is 130mm, you will need to allow for spacing of the relevant tap set's flanges.
Connections: 2 of 1/2
" BSP Male Threaded Connections (1 on each stop body).
Mounting Hole Sizes: Hole sizes required are a minimum diameter of 32mm (1 & ¼ inches) for the taps and minimum of 25.4mm (1 inch) for the outlet. The relevant tap's flange should cover any variation to this, please check the individual tap diagram for confirmation. Cover plates are available or can be manufactured to order at additional cost if required.
Learn More
Ex GST:
AUD $356.89
Inc GST:
AUD $392.58
-
SKU: PA0043RB
Raw Brass Basin Stop Body with Locking Nuts, Compression Nut & Olive
Suitable for our Standard Basin Sets and Standard Vanity Sink Sets.
Learn More
Ex GST:
AUD $60.96
Inc GST:
AUD $67.06
-
SKU: SA7228
|
|
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
|
Cap with seal is removed with flat head screwdriver.
Internal stainless steel grub screw is then adjustable with a 1/8
" hex allen key. The position of this internal grub screw determines how much the flow is impeded.
1/2
" BSP Female Inlet & 1/2
" BSP Male Outlet.
Replacement o-ring for servicing is BS008.
Learn More
Ex GST:
AUD $44.71
Inc GST:
AUD $49.18
-
SKU: PA8280RB
These extensions are designed to help counteract deep seats in walls by allowing more thread for the flange to screw on to.
These are suitable for extending Rapid Action wall taps (wall top assemblies). The tap you require this extension for should be noted to CB when ordering.
If the breech is too deep in the wall you may need a combination of this component and a top assembly with a longer spindle to provide a satisfactory resolution. Please see the relevant spares section for suitable spindles. Extended bonnets & spindles are supplied with a bonnet thread extension piece.
Depending on the situation you may also need to add Trouble Rings to the wall flanges which are separate items and additional cost.
Learn More
Ex GST:
AUD $15.39
Inc GST:
AUD $16.93
-
SKU: PA1178RB
These extensions are designed to help counteract deep seats in walls by allowing more thread for the flange to screw on to.
These are suitable for extending standard action wall taps (wall top assemblies). The tap you require this extension for should be noted to CB when ordering.
If the breech is too deep in the wall you may need a combination of this component and a top assembly with a longer spindle to provide a satisfactory resolution. Please see the relevant spares section for suitable spindles. Extended bonnets & spindles are supplied with a bonnet thread extension piece.
Depending on the situation you may also need to add Trouble Rings to the wall flanges which are separate items and additional cost.
Learn More
Ex GST:
AUD $15.39
Inc GST:
AUD $16.93
-
SKU: PA1532RB
This extension is usually only suitable for
basin taps with normal jumper valves.
Should not be used with our Rapid Action sets.
*
Should not be used on the wall taps (wall top assemblies).
*
These extensions are designed to allow for being cut down at the time of installation to suit the depth required.
If you would like us to machine down the extension piece to a specific length before sending we can do this for you.
Learn More
Ex GST:
AUD $29.48
Inc GST:
AUD $32.43
-
SKU: PA8040
Replacement Ceramic Cartridge for CB Flick Mixers & DB Series Mixers
This code provides a cartridge only.
We use a uniform size cartridge between all of our flick mixers.
Learn More
Ex GST:
AUD $24.34
Inc GST:
AUD $26.77
-
SKU: PA8320
This code provides a cartridge and a replacement sticker button only. Please select preferred colour.
This button type is only really recommended for Chrome or Antique Brass finishes, other custom finishes generally require use of the engraved button. On later versions of the mixers the standard button is more easily removable so the button does not need to be replaced. (The engraved button option was only made available after this improvement).
We use a uniform size cartridge between all of our flick mixers.
Learn More
Ex GST:
AUD $29.40
Inc GST:
AUD $32.34
-
SKU: PA8032
High quality DR brass hydroseals are standard all CB Rapid Action tapware.
Hydroseals are now also standard on all of our full turn tapware.
(Please note that hydroseals are not used in flick mixers).
Learn More
Ex GST:
AUD $5.60
Inc GST:
AUD $6.16
-
SKU: SA7525
|
|
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
|
This duo spacer cover plate is useful if the hole in the bench top is too large for our Duo Mixers.
68mm wide by 45mm deep.
3mm overall height.
34mm internal diameter. Plain bore.
Learn More
Ex GST:
AUD $66.47
Inc GST:
AUD $73.12
-
SKU: SA7522
|
|
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
|
64mm outside diameter.
8mm overall height.
33.7mm internal diameter. Plain bore.
Custom cover plate sizing can be made on request. Pricing on application.
Learn More
Ex GST:
AUD $47.16
Inc GST:
AUD $51.88
Ex GST: AUD $43.33 Inc GST: AUD $47.66