Wall Top Assembly Installation Depth
- To guide what depth the breech's in wall bodies should be set so not to require the use of trouble rings to hide the gap between the wall and the flange.
- Where the in wall bodies are already in the wall it can be calculated whether extended bonnets & spindles are required and/or if trouble rings are required.
Select Wall Top Assembly:
RU2043 Roulette Wall Top Assembly
Choose an option...
BA2243 Gaol Safe Wall Top Assembly
BA3243 CB Ideal Seaview Wall Top Assembly
BA3263 CB Ideal Seaview Wall Top Assembly with Spindle Extended by 15mm
BV2043 Bellevue Wall Top Assembly
BV2063 Bellevue Wall Top Assembly with Spindle Extended by 15mm
BV2043-RACT Bellevue Wall Top Assembly with Rapid Action
BV2063-RACT Bellevue Wall Top Assembly with Spindle Extended by 15mm & Rapid Action
HE2043 Heritage Wall Top Assembly
HE2063 Heritage Wall Top Assembly with Spindle Extended by 15mm
HE2043-RACT Heritage Wall Top Assembly with Rapid Action
HE2063-RACT Heritage Wall Top Assembly with Spindle Extended by 15mm & Rapid Action
RL2543 Roulette Lever Wall Top Assembly
RL2563 Roulette Lever Wall Top Assembly with Spindle Extended by 15mm
RU2043 Roulette Wall Top Assembly
RU2063 Roulette Wall Top Assembly with Spindle Extended by 15mm
RU2043-RACT Roulette Wall Top Assembly with Rapid Action
RU2063-RACT Roulette Wall Top Assembly with Spindle Extended by 15mm & Rapid Action
SP2043 CB Steampunk Wall Top Assembly
TC2543 Torrens Capstan Wall Top Assembly
TC2563 Torrens Capstan Wall Top Assembly with Spindle Extended by 15mm
TF2543 Torrens Flared Lever Wall Top Assembly
TF2563 Torrens Flared Lever Wall Top Assembly with Spindle Extended by 15mm
TL2543 Torrens Lever Wall Top Assembly
TL2563 Torrens Lever Wall Top Assembly with Spindle Extended by 15mm
TX2543 Torrens Knurled Wall Top Assembly
TX2563 Torrens Knurled Wall Top Assembly with Spindle Extended by 15mm
TX2543-TORX Torrens Knurled with Torx Screw Wall Top Assembly
TX2563-TORX Torrens Knurled with Torx Screw Wall Top Assembly with Spindle Extended by 15mm
𝑥
Add Bonnet Thread Extension
SKU: PA1178RB
SKU: PA1178RB
MinimumMaximum
2mm19mm
Calculate trouble ring thickness (if required).
Enter the distance from the Face of Tile to the Face of the In Wall Body (𝑥): mm.
(Entering a negative number means that the in wall body is protruding from the wall face.)
Thickness of trouble ring required = .
Other considerations to note:
Enter the distance from the Face of Tile to the Face of the In Wall Body (𝑥): mm.
(Entering a negative number means that the in wall body is protruding from the wall face.)
Thickness of trouble ring required = .
Other considerations to note:
- Values and calculation are based on a wall flange with no trim. If ordering with a wall top assembly with a gold trim or chrome trim dress ring it will add 3mm of thickness to base of the flange, this reduces the maximum 𝑥 value by 3mm. This is not taken into account in the above calculation.
- The trouble ring calculation applies an extra 1mm of thickness to help ensure the wall flange has enough engagement to hold the trouble ring in place against the wall.
- One trick if needing an extra 1mm of thread to put the flange on you can double stack the red fibre washer. Please note this will affect (increase) the turn amount on Rapid Action spindles so do not do this on lever wall top assemblies.
- Installing or servicing a Rapid Action bonnet & spindle should be done with a 7/8" AF square spanner (22.23mm AF square i.e. PA3917) or an adjustable wrench.
- Installing or servicing a standard action bonnet & spindle should be done with a 21mm AF Hex tube spanner or an adjustable wrench.
Loading, please wait...-
SKU: PA1178RBBonnet Thread Extension (15 BSP) (Adds 15mm to Bonnet Thread) [Raw Brass]
Ex GST: AUD $15.39 Inc GST: AUD $16.93 -
SKU: PA8280RBBonnet Thread Extension (5/8 BSP) (Adds 15mm to Bonnet Thread) [Raw Brass]
Ex GST: AUD $15.39 Inc GST: AUD $16.93 -
-
-
-
