Torrens® Lever
Another version of the Torrens Capstan, the Torrens Lever retains a single spoke. Suitable for contemporary designs and commercial environments.
This style uses our Rapid Action® (1/4 Turn) spindles as standard for simple maintenance. A full explanation of the advantages of our Rapid Action® mechanism can be found in the Rapid Action (1/4 Turn) FAQ.
|
|
Loading, please wait...-
Torrens Lever Wall Bonnet & Rapid Action Spindle
SKU: TL2505
Torrens Lever Wall Bonnet & Rapid Action Spindle
Specify in Order Notes if Hot or Cold Required.
Turning direction diagram available in FAQ Section.
A = 79mm
B = 44mm
(Please note this spindle is also used for the Forward Bowl Sink Set underassembly, as more height is required than the Basin/Vanity spindle).
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here.
This bonnet & spindle is only supplied in Raw Brass as it is not visible when installed. Learn More
Ex GST: AUD $86.85 Inc GST: AUD $95.54 -
Torrens Lever Basin & Vanity Bonnet & Rapid Action Spindle
SKU: TL2502
Torrens Lever Basin & Vanity Bonnet & Rapid Action Spindle
Specify in Order Notes if Hot or Cold Required.
Turning direction diagram available in FAQ Section.
A = 70mm
B = 37mm
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here.
This bonnet & spindle is only supplied in Raw Brass as it is not visible when installed. Learn More
Ex GST: AUD $86.85 Inc GST: AUD $95.54 -
Duo Mixer Plinth Kit
SKU: SA7523
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Designed to increase the height of our Duo Mixers by 115mm so they can be utilised with raised basin bowls.
Includes o-ring seal for base in contact with bench top.
Machined solid brass construction with a weight of approximately 2kg.
Includes extended mounting threads for the Duo Mixer body.
Duo Mixer not included. Learn More
Ex GST: AUD $252.00 Inc GST: AUD $277.20 -
Hydroseal DR Brass Jumper Valve
SKU: PA8032
High quality DR brass hydroseals are standard all CB Rapid Action tapware.
Hydroseals are now also standard on all of our full turn tapware.
(Please note that hydroseals are not used in flick mixers). Learn More
Ex GST: AUD $5.60 Inc GST: AUD $6.16 -
O-Ring for Rapid Action Spindle (BS110) - Pack of 10
SKU: PA8004
This o-ring is for our Rapid Action spindles.
Rapid Action spindles require 2 to 3 o-rings per spindle (will vary by range & spindle type).
Packet of 10 o-rings.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store.
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $11.00 Inc GST: AUD $12.10