Contemporary (D Type & T-Head)
Contemporary is a general component style.
|
|
Loading, please wait...-
O-Ring for Standard CB Spindle (BS008.5) - Pack of 10
SKU: PA8003
This o-ring is for our standard jumper valve spindles.
Standard jumper valve spindle requires 1 o-ring.
Packet of 10 o-rings.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store. Learn More
Ex GST: AUD $11.00 Inc GST: AUD $12.10 -
Hydroseal DR Brass Jumper Valve
SKU: PA8032
High quality DR brass hydroseals are standard all CB Rapid Action tapware.
Hydroseals are now also standard on all of our full turn tapware.
(Please note that hydroseals are not used in flick mixers). Learn More
Ex GST: AUD $5.60 Inc GST: AUD $6.16 -
Vanity Thick Bench Under Assembly [Raw Brass & Copper]
SKU: PA4339RB
Maximum Bench Thickness: 52mm
Spacing (Centre to Centre): 330mm
Adjustable Spacing: Yes, can be cut down on installation.
The minimum recommended Centre to Centre measurement is 130mm, you will need to allow for spacing of the relevant tap set's flanges.
Connections: 2 of 1/2" BSP Male Threaded Connections (1 on each stop body).
Mounting Hole Sizes: Hole sizes required are a minimum diameter of 32mm (1 & ¼ inches) for the taps and minimum of 25.4mm (1 inch) for the outlet. The relevant tap's flange should cover any variation to this, please check the individual tap diagram for confirmation. Cover plates are available or can be manufactured to order at additional cost if required.
Learn More
Ex GST: AUD $356.89 Inc GST: AUD $392.58 -
D Type Bib / Pillar Bonnet & Standard Action Spindle
SKU: DK2021
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Ex GST: AUD $60.79 Inc GST: AUD $66.87 -
Male & Female Stopcock 15 BSP (without Head & Button)
SKU: DK0022
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Ex GST: AUD $130.87 Inc GST: AUD $143.96 -
Female & Female Stopcock 15 BSP (without Head & Button)
SKU: DK0021
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Ex GST: AUD $130.87 Inc GST: AUD $143.96 -
Solid Cover Plate
SKU: SA7521
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Select required hole size for solid brass cover plate from options.
8mm overall height.
When pairing this item with PA1621 - Diverter Union Nut & Tail, you should select this with 1/2" BSP Thread in Cover Plate.
Custom hole sizing can be made on request. Pricing on application. Learn More
Ex GST: AUD $47.16 Inc GST: AUD $51.88 -
Pressed Flange Cover Plate
SKU: SA7526
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This cover plate is suitable for Washing Machine and Cistern Cocks, & Bibcocks in each range. This part is also used on various exposed tapware sets.
We do not offer customisation of the dimensions of this item. If you need a selection of hole sizes in a cover plate, the Solid Cover Plate, SA7521 is the starting point. Learn More
Ex GST: AUD $23.95 Inc GST: AUD $26.35 -
Cistern Cock without Cover Plate (without Head & Button)
SKU: DK0049
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This is an each code. It is not pair.
Recommended cover plate to go with this item is our Pressed Flange, SA7526. Learn More
Ex GST: AUD $130.87 Inc GST: AUD $143.96 -
Washing Machine Cock without Cover Plate (without Head & Button)
SKU: DK0047
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This is an each code. It is not pair.
Recommended cover plate to go with this item is our Pressed Flange, SA7526. Learn More
Ex GST: AUD $130.87 Inc GST: AUD $143.96 -
Pillarcock (without Head & Button)
SKU: DK0085
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This is an each code. Learn More
Ex GST: AUD $165.76 Inc GST: AUD $182.34 -
Upswept Bibcock with Female Inlet and Male Screw Nose (without Head & Button)
SKU: DK0064
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Upswept Bibcock with Female Inlet and Male Screw Nose (without Head & Button)
Inlet = 1/2" BSP Female
Outlet = 3/4" BSP Male
This is an each code.
Recommended cover plate to go with this item is our Pressed Flange, SA7526. Learn More
Ex GST: AUD $130.87 Inc GST: AUD $143.96 -
Upswept Bibcock with Male Inlet and Male Screw Nose (without Head & Button)
SKU: DK0063
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Upswept Bibcock with Male Inlet and Male Screw Nose (without Head & Button)
Inlet = 1/2" BSP Male
Outlet = 3/4" BSP Male
This is an each code.
Recommended cover plate to go with this item is our Pressed Flange, SA7526. Learn More
Ex GST: AUD $130.87 Inc GST: AUD $143.96 -
Upswept Bibcock with Female Inlet and Plain Nose (without Head & Button)
SKU: DK0062
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Upswept Bibcock with Female Inlet and Plain Nose (without Head & Button)
Inlet = 1/2" BSP Female
This is an each code.
Recommended cover plate to go with this item is our Pressed Flange, SA7526. Learn More
Ex GST: AUD $130.87 Inc GST: AUD $143.96 -
Upswept Bibcock with Male Inlet and Plain Nose (without Head & Button)
SKU: DK0061
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Upswept Bibcock with Male Inlet and Plain Nose (without Head & Button)
Inlet = 1/2" BSP Male
This is an each code.
Recommended cover plate to go with this item is our Pressed Flange, SA7526. Learn More
Ex GST: AUD $130.87 Inc GST: AUD $143.96