CB Ideal Tapware Pty Ltd | 1a Deloraine Road, Edwardstown, South Australia, 5039
Phone: +61 (08) 8276 6766 | Email: sales@cbideal.com.au | Print out generated: 8th of April 2025 ACST
Phone: +61 (08) 8276 6766 | Email: sales@cbideal.com.au | Print out generated: 8th of April 2025 ACST
Details
Heritage Floor Mounted Bibcock Set
The 200mm Centre to Centre brace on this unit is welded (cannot be cut down or reduced on installation), if different spacing is required please discuss with CB as a custom unit will need to be manufactured. Made to Order brace priced on application.
Standard distance from floor to bottom of bib nose is 690mm. Overall height from floor to top of spindle when open is approximately 815mm. Please check the air gap clearance between the top of the bath and the bottom of the bib outlet will satisfy your local building requirements. Made to order leg heights can be selected in the Customisation Options.
Floor cover plate diameter is 64mm.
The 200mm Centre to Centre brace on this unit is welded (cannot be cut down or reduced on installation), if different spacing is required please discuss with CB as a custom unit will need to be manufactured. Made to Order brace priced on application.
Standard distance from floor to bottom of bib nose is 690mm. Overall height from floor to top of spindle when open is approximately 815mm. Please check the air gap clearance between the top of the bath and the bottom of the bib outlet will satisfy your local building requirements. Made to order leg heights can be selected in the Customisation Options.
Floor cover plate diameter is 64mm.
Additional Information
| Product Function | Bibcock, Bath Outlet, Floor Mounted |
|---|---|
| Style Association | Heritage |
| Material | DR Brass |
| Handle Type | Cross Handle |
| Spindle Type | Splined Spindle |
| Cartridge / Valve | Jumper Valve |
| Turning Type | Full Turn Standard Action, is upgradable to Rapid Action (1/4 Turn) with Hydroseal Valve |
| Outlet Type | Fixed Position Outlet |
| Outlet Styling | Bibcock |
| Outlet Reach (mm to Aerator or Rose) | 200 |
| Water Efficiency Star (WELS) Rating | N/A |
| Flow Rate (Litres Per Minute) | No |
| Suitable for Gravity Feed | Yes |
| Suitable for Hot Water Units | Yes |
| Maximum operating pressure (kPa) | Suitable for High/Mains Pressure / 500 kPa (Australian Standards AS/NZS 3500 and the Plumbing Code of Australia) |
| Maximum Working Temperature (Degree C) | 65 |
| Relevant Standards | AS 3718:2021, AS/NZS 4020:2018 |
| Quantity Unit of Measure | Set |
| Warranty | 5 Years |
| WELS Licence | WELS Rating Not Required |
| WELS Registration | Not Applicable |
