Phone: +61 (08) 8276 6766 | Email: sales@cbideal.com.au | Print out generated: 9th of January 2025 ACST
Details
Roulette Wall Top Assembly
Specify in Order Notes if Hot or Cold Required.
This is an each tap code. It is not pair.
Installation Requirement:
Plumber to supply and install a normal in-wall breeching piece.
The breech in the wall needs to have a 5/8" BSP female seat - the normal jumper valve type breech in Australia.
If replacing existing similar tapware it is likely this breech type is pre-existing in the wall. Please consult with your plumber.
International customers please consult with our sales staff as further components and adapters may be required.
Please refer to the Wall Top Assembly Installation Depth information page for checking the required in wall body depth from the finished wall face.
Additional Information
Product Function
Top Assembly
Style Association
Roulette
Material
DR Brass
Handle Type
Cross Handle
Spindle Type
Splined Spindle
Cartridge / Valve
Jumper Valve
Turning Type
Full Turn Standard Action, is upgradable to Rapid Action (1/4 Turn) with Hydroseal Valve
Outlet Type
N/A
Outlet Styling
N/A
Outlet Reach (mm to Aerator or Rose)
N/A
Water Efficiency Star (WELS) Rating
N/A
Flow Rate (Litres Per Minute)
N/A
Suitable for Gravity Feed
Yes
Suitable for Hot Water Units
Yes
Maximum operating pressure (kPa)
Suitable for High/Mains Pressure / 500 kPa (Australian Standards AS/NZS 3500 and the Plumbing Code of Australia)